Door and window hardware accessories are the general term for the metal structure of windows and doors, which are specifically divided into: hinges, tracks, door suctions, floor suctions, door clips, door closers, door mirrors, beading, etc.
1.Door Hinge
Ordinary hinge: suitable for cabinet doors, windows, doors, etc. Selected materials are iron, copper and stainless steel. The disadvantage of ordinary hinges is that they do not have the function of spring hinges. After assembling the hinges, be sure to install all kinds of bumping beads, otherwise the wind will blow the door panel.
Pipe hinges: also called spring hinges. It is specifically suitable for the connection of home door panels. Generally speaking, the thickness of the board is 16~20mm. The selected materials are galvanized iron and zinc alloy. The spring hinge comes with adjustment screws, which can adjust the aspect ratio and thickness of the board. One of its features is that it can match the opening angle of the cabinet door according to the interior space. In addition to the general 90-degree angle, 127-degree, 144-degree, 165-degree, etc. have corresponding hinges to match, so that all kinds of cabinet doors have corresponding stretches.
Door hinge: It is divided into ordinary type and bearing type. The ordinary type has been mentioned before. Bearing type is divided into copper and stainless steel according to the selected material. Judging from the current consumption situation, copper bearing hinges are used more because their styles are beautiful and bright, their prices are relatively moderate, and they are equipped with screws.
Other hinges: There are safety glass hinges, work surface hinges, door hinges. Safety glass hinges are suitable for assembling frameless safety glass cabinet doors, and the thickness of the glass should not exceed 5~6mm.
2. Hinges
Hinge, Ming hinge is the kind you see most doors use on weekdays, and there is no resilience. Concealed hinges are mostly suitable for home use, and can be divided into hydraulic, quick-loading, framed doors and ordinary ones.
3. Track
Window and door runners are generally grooved or curved guide rails for sliding windows and doors. Ball bearings are often installed to facilitate the sliding and pulling of windows and doors. Refers to sliding door track, hanging wheel, safety glass pulley, latch (light and dark).
4. Door stop
The door suction is assembled on the back of the door. After the door is opened, the magnetism of the door suction can be used to stabilize it, so as to avoid the wind being gently blown and it will automatically close.
5 door stopper
Floor suction is a type of door suction, also known as floor mounted door suction. Door suction, also known as door touch, is also a type of device that sucks up precise positioning after the door leaf is opened, so as to avoid the wind blowing gently or touching the door leaf and closing it. But in ordinary life, the door suction usually refers to the wall-mounted door suction, that is, the door suction assembled on the wall; the floor suction refers to the floor-mounted door suction, that is, the door suction assembled on the ground.
6. Door clip
The door clip refers to the glass door clip, which is suitable for clamping the hardware of the glass door to cooperate with the ground spring or the ground shaft to make the door operate under normal conditions. It is widely used in safety glass windows and doors, bathroom doors and shower rooms.
Post time: Sep-01-2022